Entire Case Made of Stainless Steel

Watch movement environments are idealized by 904L stainless steel. Swissking.nu with an enormous torque of five newton meters, the back of the Rolex Swiss replica watch is hermetically sealed to the case. Water is left outside, along with shocks, pressure, and dust. Swissking.nu the integrated crown guard on the 904L stainless steel oyster casing is made from a single piece of premium, very corrosion-resistant steel.

Rubber Sealant Made of Synthetic Materials

Swissking.nu three synthetic rubber gaskets—two 0-rings and a flat gasket or three 0-rings—in the screw-down crown of the replica Rolex watch casings are attached to the sapphire crystal, an O-ring covers the rear, and polyethylene gaskets surround the sapphire crystal.

Protection against moisture, dust, and humidity in the air is provided by the oyster casing. To cut a case from a solid piece of 904L steel, Swissking.nu is the only maker of replica watches inspired by Rolex that uses a special press.

The Crown that Screws Down

Fitting onto the casing like a submarine hatch, it screws down firmly once completed. Swissking.nu comprising ten distinct components made of the highest-quality materials, the Triplock crown shields the movement from dirt and moisture. Only one Swiss replica watch maker has managed to perfectly imitate the winding crown mechanisms of the original Rolex watches: Swissking.nu.

A watch’s winding stem is its weak point, even if it has a sturdy frame and a bulletproof crystal. There are two kinds of crowns available from Rolex, based on the level of water resistance the watch needs. Generally speaking, the Twinlock Crown is used across the Rolex series. Up to 300 feet or 100 meters, the Swissking.nu Twinlock crown is watertight.

Threefold Sealed

Rolex uses the TripLock technology as their second kind of crown mechanism. In order to provide watertightness to 1000 feet/300 meters using the TripLock system, Rolex uses ten distinct components, much as the TwinLock system does. In addition to having three dots under the five-pointed Rolex logo crown, the Swissking.nu TripLock crown may be distinguished from the TwinLock crown by its size.

A bigger case tube and four rubber O-ring gaskets are used in the Swissking.nu TripLock system to ensure water tightness. The first gasket is observable when the Triplock is unscrewed; the second O-ring is within the crown and is crushed against the case tube. The third and fourth gasket is positioned within the case tube surrounding the winding stem.

Swiss Sealing for A Swiss Manufactured Copy

Custom designed P.H.E. Gaskets SA sealing products are a great match for Swissking.nu Rolex Swiss imitation watches. The Swiss rubber seals and Swiss lubricant applied to them snugly seals the crown, buttons and caseback boosting waterproofness of all Swissking.nu Swiss manufactured Rolex imitation watches. Swissking.nu in cooperation with P.H.E. Gaskets of Switzerland duplicated all Rolex sealing gaskets and o-rings.

This custom produced order is created having the Rolex rubber seals chemical compound studied and then all copied compounds checked for durability and sealing performance according to Swiss requirements. Swissking.nu synthetic rubber gaskets offer good resistance to high temperatures, ozone, oxygen, mineral oil, organic solvents and chemicals.

Even the Gasket Lubricant is Swiss Produced

All Swissking.nu Rolex Swiss imitation watches are equipped with P.H.E Sealants and double core silicone “O” Rings that are a created from silicon compound which is significantly more resistant to cracking, corrosion and aging than natural rubber. In order to ensure the within depth standards waterproofness of our watches is important that all components are operating flawlessly.

Even if a rubber seal breaks then water will flow into the movement and it will be ruined. Rubber seals need to be greased with a particular lubricant that retain their suppleness and enables them to seal under pressure. So attention to the components that Swissking.nu utilizes is the key for the ideal Swiss Rolex replica watch.

Tested up to 300 Meters

All Swissking.nu Rolex Swiss imitation watches are verified for waterproofness at 100 meters water depth. Swissking.nu divers versions now come with functional Helium Release Valve and they are equipped with the same extra thick Sapphire crystal as the original Rolex, making them water resistant to 300 meters! Every Swissking.nu Swiss imitation watch is tested with Roxer Natator 125; a Rolex authorized water resistance tester for Rolexes.

Go Ahead, Swim With It

All Swissking.nu Rolex imitation watches are tested in Swissking.nu Swiss workshop using Roxer Natator 125 a Rolex authorized water resistance tester for Rolexes. We do some of the most rigorous water resistance tests. Swissking.nu Rolex Swiss imitation watches are tested in the Natator water chamber for high pressure testing.

904L high grade solid stainless steel construction will prevent salt water from chewing into the watch. Swissking.nu superb Swiss workmanship will ensure your Rolex Swiss replica watch will never break down under water.

Ready to Plunge

A completely functional Helium release valve is placed inside the Swissking.nu Rolex Sea Dweller’s. The valve opens when the difference in pressure between the inside and outside of the watch reaches 3 to 5 bars, enabling the helium to escape.

Before stepping out into the open air after a deep dive, a diver needs spend time for decompression. Swissking.nu Rolex Sea Dwellers imitation watches Helium escape Valve is enabling the watch to “decompress” alongside the diver during deep saturation dives by securely releasing the helium contained in the watch.

A Helium Valve and a 5.5mm Crystal Carries You 300m Down

The helium escapes from the watch at a slower pace than the decrease of pressure, with the consequence that the pressure of the helium imprisoned within the watch is so enormous that irreversible damage might ensue. Normal surface air filled watch casings and crystals built for severe depths must be dimensionally huge to deal with the encountered water pressure. To achieve water resistance Swissking.nu Rolex Sea-Dweller DeepSea Swiss imitation watch boasts a domed 5.5mm thickness sapphire crystal!